top of page

GISTM and Tailings Management: Improving TSF Safety, Performance and Long-Term Sustainability

johncastiblanco
Nov 11
16 min read

The Global Industry Standard on Tailings Management has changed expectations across the mining industry. But achieving safer tailings facilities requires more than compliance. It requires better knowledge, proactive risk management and technologies that improve the physical condition of tailings throughout the facility lifecycle.


Introduction


Tailings management has become one of the most important challenges facing the global mining industry.

Every year, mining operations generate billions of tonnes of tailings, the finely ground waste material remaining after valuable minerals have been extracted. These materials are commonly stored in engineered Tailings Storage Facilities (TSFs), where their long-term management presents significant geotechnical, environmental, operational and social responsibilities.


Historically, tailings management has often focused on containment, water management and maintaining sufficient storage capacity. However, catastrophic tailings facility failures have demonstrated the consequences of inadequate risk management, poor governance and insufficient consideration of long-term facility performance.


The Global Industry Standard on Tailings Management (GISTM), launched in August 2020, represents a significant shift in how the industry approaches these responsibilities.


Developed through the Global Tailings Review, convened by the International Council on Mining and Metals (ICMM), the United Nations Environment Programme (UNEP) and the Principles for Responsible Investment (PRI), GISTM establishes a global framework for the safe and responsible management of tailings facilities.

Its ultimate objective is zero harm to people and the environment, with zero tolerance for human fatalities.


But implementing GISTM is not simply about meeting regulatory requirements or completing technical audits. It requires mining companies to understand their tailings facilities, manage risks throughout their lifecycle, engage affected communities and continually improve operational practices.


It also raises an important question:


How can mining companies move beyond monitoring tailings facilities towards actively improving the condition and performance of the tailings themselves?


This article explores GISTM, its key requirements, the challenges of modern tailings management and the role that technologies such as Accelerated Mechanical Consolidation (AMC™) can play in supporting safer, more sustainable tailings operations.


1. What Is GISTM? Understanding the Global Industry Standard on Tailings Management


  • The Global Industry Standard on Tailings Management is an international framework designed to improve the safety and accountability of tailings storage facilities throughout their entire lifecycle.


  • It was developed following growing international concern about the consequences of tailings facility failures, particularly the catastrophic failure at Brumadinho, Brazil, in January 2019.


  • GISTM establishes a common global approach to tailings facility management, bringing together engineering, environmental, social, governance and operational considerations.


    The standard is structured around:


    • 6 Topic Areas

    • 15 Principles

    • 77 Auditable Requirements


    These requirements apply across the lifecycle of a tailings facility, from initial planning and design through construction, operation, closure and post-closure.


    The six GISTM topic areas

Topic area

Main focus

1. Affected Communities

Human rights, engagement and addressing potential harm to affected people

2. Integrated Knowledge Base

Understanding the social, environmental, technical and local economic context

3. Design, Construction, Operation and Monitoring

Engineering integrity, risk management and performance monitoring

4. Management and Governance

Accountability, organisational responsibilities and independent review

5. Emergency Response and Long-Term Recovery

Preparedness, response planning and recovery following a failure

6. Public Disclosure and Access to Information

Transparency, reporting and public accountability

The standard recognises that tailings safety cannot be managed through engineering controls alone. It requires an integrated approach that considers the people, environment and communities potentially affected by a facility.


For mining operators, this means establishing effective tailings management systems, maintaining reliable technical information, assigning clear responsibilities and ensuring that decisions are informed by the actual conditions of each facility.


Workers in hard hats and children watch a large road machine on a gray dam site with hills in the background.
Tailings life cycle

GISTM compliance versus continuous improvement


An important distinction is that GISTM provides a framework for responsible tailings management. It does not prescribe one specific engineering solution or technology. Operators must assess their individual facilities, identify applicable requirements, evaluate risks and implement appropriate controls. Achieving conformance is therefore not the end objective. It is part of an ongoing process of improving tailings facility safety and performance.


2. Why Tailings Management Is Critical to Mine Safety


Tailings are not static materials. Their physical and geotechnical properties change over time as water moves through the deposited material, pore pressures dissipate and consolidation progresses. Understanding these changes is fundamental to effective TSF management.


The relationship between water, pore pressure and tailings stability


Freshly deposited tailings are commonly near-saturated and contain substantial quantities of pore water. In saturated, fine-grained tailings, pore water pressure can carry a significant proportion of the applied load. This limits effective stress, which is a fundamental factor governing soil strength and deformation. When pore pressures are elevated, the effective stress available to resist deformation is reduced.


Depending on the material properties, stress conditions and loading history, this can contribute to reduced shear strength and increased susceptibility to instability, including static liquefaction in susceptible materials.

This is why tailings water management, consolidation and geotechnical stability are closely connected.


Key factors influencing tailings behaviour include:


  • Pore water pressure and effective stress.

  • Degree of saturation and moisture content.

  • Particle size distribution and clay mineralogy.

  • Void ratio and dry density.

  • Permeability and drainage conditions.

  • Shear strength and stress history.

  • Deposition thickness and consolidation time.


These parameters need to be understood and assessed through appropriate geotechnical investigations, instrumentation, monitoring and engineering analysis.


Why monitoring alone is not enough


Monitoring is essential for understanding the behaviour of a tailings storage facility.

Common monitoring methods include:


  • Piezometers to measure pore water pressure.

  • Inclinometers to monitor subsurface deformation.

  • Surveying and geospatial monitoring to assess movement.

  • Satellite-based monitoring and remote sensing.

  • Ground-based radar and other deformation monitoring systems.

  • CPT and CPTu investigations to assess subsurface soil behaviour.

  • Density and moisture measurements to understand tailings conditions.


These systems provide valuable information about the performance of a TSF and help operators identify changes that require investigation or action. However, monitoring does not physically change the condition of the tailings. Where monitoring identifies opportunities or requirements for intervention, operators must evaluate appropriate engineering and operational controls. This is where proactive tailings management becomes important: understanding the material, identifying risks and implementing measures that improve the facility's overall performance.


High angle view of a tailings storage facility surrounded by natural vegetation
TSF in South America

3. GISTM and the Importance of Tailings Storage Facility Design and Operation


GISTM places significant emphasis on the design, construction, operation and monitoring of tailings storage facilities. A TSF must be managed as an engineered facility, with appropriate design criteria, operating procedures, risk assessments and ongoing performance reviews. The management approach must consider the entire facility lifecycle rather than focusing exclusively on its current operating condition.


Tailings deposition and operational management


Deposition practices influence the distribution of tailings, water and solids throughout a TSF. Poorly controlled deposition can contribute to uneven material distribution, variable density, localised water accumulation and inconsistent consolidation behaviour.


Effective tailings deposition management should consider:


  • Deposition location and sequence.

  • Tailings solids concentration and rheology.

  • Beach development and slope geometry.

  • Supernatant pond location and management.

  • Water balance and decant capacity.

  • Layer thickness and consolidation time.

  • Drainage conditions and seepage control.

  • Operational access and equipment requirements.


These factors influence the geotechnical condition of the deposited material and the available storage capacity of the facility.


Understanding the consequences of tailings accumulation


As tailings accumulate, the available storage volume decreases. At the same time, deposited materials undergo consolidation as pore water is progressively expelled and the soil structure changes. The rate of consolidation depends on the material's permeability, drainage path, thickness, compressibility and loading conditions. For fine-grained, low-permeability tailings, natural consolidation can be extremely slow, particularly where drainage paths are long. This creates an operational challenge: large volumes of deposited material may continue occupying storage capacity while retaining substantial water. Improving consolidation and understanding how tailings respond to mechanical loading can therefore become important considerations when evaluating TSF performance and long-term storage requirements.



4. Tailings Dewatering and Water Management: A Critical Part of GISTM


Water management is one of the most important aspects of responsible tailings management. Water influences tailings behaviour, facility operations, environmental performance and the overall mine water balance. For mining operations in water-stressed regions, recovering and reusing process water can also deliver significant economic and operational benefits. There are several approaches to tailings dewatering, each with different engineering requirements, operating costs and applications.


Conventional tailings dewatering methods


Common tailings water management approaches include:


1. Natural settling and consolidation

Tailings are deposited into a TSF, where solids settle and pore water is progressively released through natural consolidation. The process can be slow, particularly for fine-grained materials with low permeability.


2. Thickening

Thickeners increase the solids concentration of tailings before deposition, reducing the volume of water transported to the TSF.


3. Pressure filtration

Filter presses mechanically separate water from solids using pressure and filter media. The resulting filter cake can be transported and placed as filtered tailings.


4. Paste and thickened tailings

Higher-solids tailings are deposited with different rheological properties and reduced free-water content compared with conventional slurry deposition.


5. Accelerated Mechanical consolidation

Mechanical consolidation applies controlled mechanical loading to deposited tailings to accelerate consolidation and improve their physical condition. The appropriate method depends on tailings characteristics, site conditions, water requirements, facility design and project economics.


Why water recovery matters

Recovering water from tailings can reduce the need for freshwater abstraction and improve operational water security. It can also help operators manage the water balance of a TSF and reduce the volume of free water requiring management. However, water recovery should not be considered in isolation. The physical condition of the remaining tailings, pore pressure distribution, drainage conditions and overall facility stability must also be considered. A successful tailings management strategy therefore needs to evaluate water recovery alongside geotechnical performance, storage utilisation and closure requirements.


5. Tailings Consolidation: Improving the Physical Condition of Deposited Material


Consolidation is a fundamental geotechnical process in tailings management. It occurs as pore water is expelled from saturated soil under sustained loading, resulting in a reduction in void ratio and an increase in effective stress. As consolidation progresses, the physical properties of the tailings change. Depending on the material and stress conditions, this can result in increased density and improved shear strength.


Why natural consolidation can take so long


The rate of consolidation is strongly influenced by drainage path length and the coefficient of consolidation.

In simplified one-dimensional consolidation theory, the characteristic time required for consolidation increases approximately with the square of the drainage path length.


This means that relatively small increases in drainage distance can significantly extend the time required for consolidation. Fine-grained tailings can therefore remain in a soft, saturated condition for extended periods, particularly where they are deposited in thick layers or have limited drainage opportunities.


Mechanical loading and accelerated consolidation


Mechanical loading can provide an additional mechanism for accelerating the consolidation of deposited tailings. However, the process must be understood in terms of soil mechanics rather than simply applying pressure to dry the material. The response of tailings depends on the relationship between applied stress, pore pressure generation, drainage and the material's evolving physical state. The mechanical loading process can generate pore pressure and deformation during a pass. Between passes, pore pressure can dissipate as drainage continues.


Repeated loading and appropriate rest periods can therefore contribute to progressive consolidation. The resulting field resistance is governed by the tailings' physical state, including void ratio, moisture content, effective stress, density and saturation. This is important because the mechanical contact pressure applied by equipment should not be confused with the final shear strength of the treated tailings.


6. How Phibion's AMC™ Technology Supports Tailings Management


Phibion's Accelerated Mechanical Consolidation (AMC™) is an in-situ tailings consolidation and compaction engineering process that uses MudMaster® technology. Rather than treating tailings in a separate filtration plant, AMC works directly on deposited tailings within the existing storage facility. The process uses purpose-built amphibious MudMaster® machines equipped with twin Archimedes screw Scrolls. These Scrolls provide flotation and traction while applying mechanical loading to the tailings surface.


How AMC works


AMC applies repeated mechanical loading to deposited tailings through a controlled operating process.

The interaction between the MudMaster® Scrolls and the tailings generates normal stresses, localised peak stresses and shear deformation. The machine's load is distributed between flotation and soil bearing. The portion transferred through soil contact contributes to the mechanical loading of the tailings. The process can be understood through several stages:


1. Mechanical loading

MudMaster® traverses the deposited tailings, applying controlled mechanical loading through its Scrolls.


2. Pore pressure response

The applied loading can generate excess pore water pressure and deformation within the tailings.


3. Drainage and consolidation

Between passes, excess pore pressure dissipates and water migrates according to the available hydraulic gradients and drainage boundaries.


4. Particle rearrangement

As water is released and the material consolidates, the soil structure changes, with reductions in void ratio and increases in effective stress.


5. Improved physical condition

The resulting tailings state can exhibit increased density and field resistance, depending on the material properties and treatment conditions. The process is repeated systematically to progressively improve the condition of the deposited tailings.



Why the resulting tailings state matters


The objective of AMC is not simply to dry the surface of the tailings. The important outcome is the change in the physical condition of the material. As tailings move away from a highly saturated slurry state, changes in moisture content, void ratio, effective stress, particle contacts and potentially suction can contribute to increased resistance.


The relationship between these parameters is complex and must be assessed through appropriate geotechnical testing. This distinction is important when evaluating tailings treatment technologies. Surface appearance alone does not establish the degree of consolidation or the geotechnical performance of a treated layer.


What makes AMC different?


AMC is an in-situ process that works within the existing TSF.


It does not require tailings to be transported through a conventional pressure filtration plant before deposition.

Depending on the project configuration, tailings can continue to be deposited into designated cells and treated progressively.


Potential operational advantages include:


  • Treatment of deposited tailings within existing TSFs.

  • No requirement for a conventional filter press plant.

  • Reduced dependence on major additional processing infrastructure.

  • Progressive consolidation during active mine operations.

  • Opportunities to facilitate water recovery.

  • Potential improvement in storage utilisation.

  • Opportunities to support progressive closure planning.


The suitability and achievable outcomes depend on site-specific engineering assessments, tailings characteristics, drainage conditions, deposition practices and operational requirements.


7. AMC and GISTM: Where Technology Can Support Better Tailings Management


GISTM does not endorse a particular dewatering or consolidation technology. Instead, it requires operators to understand their facilities, assess risks and implement appropriate controls throughout the lifecycle.

AMC should therefore be considered as one potential engineering intervention within a broader tailings management strategy. There are several areas where the process may support operational objectives relevant to GISTM.


Tailings physical condition and geotechnical performance


Improving consolidation can change the physical condition of deposited tailings. Depending on the material and treatment conditions, this can contribute to increased density and shear resistance. These changes may be relevant when evaluating tailings behaviour and the operational management of a TSF. However, any changes in geotechnical performance must be verified through appropriate testing and assessed by the responsible geotechnical engineers.


Water management and recovery


AMC can facilitate the release of pore water from treated tailings. Recovered water can potentially be collected through existing or appropriately designed drainage and decant systems and returned for operational use, subject to water quality and site requirements. This provides another option for improving mine water management without necessarily introducing a large filtration plant.


Storage capacity optimisation


Consolidation reduces the volume occupied by saturated tailings as water is expelled and the material becomes denser. Over time, improving the consolidation of deposited tailings can create opportunities to optimise the available storage capacity of an existing TSF. The actual additional capacity must be established through site-specific volume, settlement and geotechnical assessments.


Progressive rehabilitation and closure


Treating tailings during active operations can create opportunities to improve the physical condition of deposited material before the end of mine life. This can support the development of progressive rehabilitation and closure strategies, provided that the resulting material meets the required geotechnical, environmental and landform performance criteria. The key opportunity is to consider tailings treatment as part of the operating strategy, rather than waiting until deposition has stopped.


8. Progressive Mine Closure: Why Tailings Management Must Start Early


Mine closure is one of the most significant long-term responsibilities associated with tailings storage facilities.

A TSF can remain an environmental and operational liability long after mineral processing has ended. Traditional closure strategies may involve capping, drainage works, water management, erosion protection, revegetation and long-term monitoring.


The complexity and cost of these activities depend on the physical condition of the tailings, the facility design, climate and intended post-closure land use.


The problem with postponing closure planning


When tailings remain saturated, soft or poorly consolidated at the end of mine life, operators may face extended periods of rehabilitation and monitoring. This can delay the implementation of final landforms and increase long-term closure obligations.


GISTM reinforces the importance of considering closure and post-closure from the earliest stages of facility planning. Rather than treating closure as a final project, operators should consider how their deposition methods, water management practices and tailings treatment strategies influence the eventual closure outcome.


Progressive closure through better tailings management


Progressive closure means undertaking rehabilitation and closure-related activities during the operating life of a mine wherever practical. AMC can support this approach by accelerating consolidation while the TSF is still operating.


Depending on the site, this may help:


  • Improve the physical condition of deposited tailings.

  • Reduce the volume occupied by consolidated material.

  • Facilitate drainage and water recovery.

  • Support the development of more stable closure landforms.

  • Create opportunities for earlier rehabilitation planning.


It is important to recognise that consolidation alone does not constitute completed closure. Final closure requires a comprehensive engineering and environmental strategy, including appropriate stability assessments, cover systems, surface water management, erosion control, revegetation and long-term monitoring.


The opportunity is to start improving the tailings condition earlier, making the eventual closure process more manageable.


9. Tailings Management Technologies: Choosing the Right Solution


There is no single technology suitable for every tailings storage facility. The right approach depends on the ore body, processing method, tailings characteristics, water balance, facility design, available land, climate, capital constraints and closure objectives. Mining companies should evaluate technologies against the actual performance requirements of their operations.


Common tailings management approaches

Technology

Primary function

Key considerations

Conventional slurry deposition

Transport and deposit tailings in a TSF

Water balance, deposition management and storage capacity

Thickened tailings

Increase solids concentration before deposition

Rheology, pumping requirements and deposition behaviour

Paste tailings

Deposit high-solids, non-segregating material

Rheology, transport and placement requirements

Pressure filtration

Separate water from solids before deposition

CAPEX, energy, filtration performance and dry-stack requirements

Accelerated Mechanical Consolidation

Accelerate consolidation of deposited tailings in situ

Drainage, layer management, tailings properties and treatment sequencing

AMC versus filtration


Pressure filtration and AMC approach tailings dewatering differently. Pressure filtration separates water from solids before the tailings are deposited. It can produce a filter cake suitable for transport and humid stacking, depending on material characteristics and design. AMC works within the existing TSF, applying mechanical loading to deposited tailings to accelerate consolidation and facilitate water release. AMC is the only technology universally suitable for every operation.


The choice should be based on the specific engineering and commercial requirements of the mine.

For operators with suitable existing TSFs, AMC provides an alternative to evaluate when considering how to improve tailings consolidation, water management and storage utilisation without necessarily investing in a new filtration plant.


10. Key Challenges in Implementing GISTM


Implementing GISTM requires more than updating technical documentation. It involves integrating risk management into the way a mining operation plans, operates and manages its tailings facilities. Several challenges commonly require attention.


1. Incomplete site knowledge

Operators need reliable information about the geological, geotechnical, hydrological, environmental and social conditions surrounding their facilities. Gaps in the knowledge base can affect risk assessments and operational decisions.


2. Complex tailings behaviour

Tailings properties can vary considerably across a facility. Particle size distribution, clay content, density, moisture, permeability and stress history can all influence performance. Understanding this variability requires appropriate sampling, testing and monitoring.


3. Water balance management

Managing water within a TSF requires an understanding of precipitation, evaporation, seepage, decant recovery, deposition and operational water demand. Poor water management can create additional operational and environmental challenges.


4. Long-term closure liabilities

Closure planning must account for the physical and chemical properties of tailings, the long-term performance of engineered structures and the potential impacts on surrounding communities and ecosystems.


5. Technology selection and integration

Mining companies must evaluate whether existing technologies and operating practices are delivering the required performance. This includes considering new technologies that may improve consolidation, water recovery, storage utilisation and closure outcomes.


6. Organisational accountability

Effective tailings management requires clear responsibilities, appropriate technical expertise, independent review and a culture in which concerns can be identified and addressed. GISTM makes clear that tailings safety is an organisational responsibility, not simply the responsibility of the geotechnical department.


11. The Future of Tailings Management: Monitoring, Automation and Innovation


The future of tailings management will increasingly rely on integrated data, automation, engineering and improved treatment technologies. Digital monitoring systems are providing operators with better visibility of facility performance, while automation is creating opportunities to improve operational consistency and reduce personnel exposure to hazardous environments. Several developments are particularly relevant.


Real-time tailings monitoring

Advances in instrumentation, remote sensing and data analytics are helping operators better understand changes in tailings conditions and facility performance. Real-time density measurement, pore pressure monitoring and geotechnical instrumentation can contribute to more informed operational decisions.


Autonomous tailings operations

Autonomous equipment can reduce the need for personnel to work directly on soft or potentially hazardous tailings surfaces. Phibion's autonomous MudMaster development is an example of how automation can be integrated into tailings treatment operations.


Integrated tailings management

The future is not about relying on a single technology. It is about combining deposition management, monitoring, water recovery, geotechnical assessment, treatment technologies and closure planning into an integrated approach. This is consistent with the broader philosophy behind GISTM: informed decisions, effective controls and continuous improvement throughout the facility lifecycle.


12. Frequently Asked Questions About GISTM and Tailings Management


What does GISTM stand for?

GISTM stands for the Global Industry Standard on Tailings Management. It is an international framework established to improve the safety and responsible management of tailings storage facilities throughout their lifecycle.


How many requirements are included in GISTM?

GISTM comprises 15 Principles and 77 auditable Requirements, organised into six topic areas.


Who developed the Global Industry Standard on Tailings Management?

GISTM was developed through the Global Tailings Review, convened by the International Council on Mining and Metals (ICMM), the United Nations Environment Programme (UNEP) and the Principles for Responsible Investment (PRI).


What is the main objective of GISTM?

Its ultimate objective is zero harm to people and the environment, with zero tolerance for human fatalities. It aims to improve tailings facility safety through integrated knowledge, risk management, accountability, emergency preparedness and public disclosure.


Does GISTM apply to existing tailings storage facilities?

Yes. The standard addresses tailings facilities throughout their lifecycle, including existing operating facilities, closure and post-closure. Applicable implementation and conformance requirements should be assessed against the relevant guidance and protocols.


Does GISTM require a specific tailings dewatering technology?

No. GISTM does not mandate a particular dewatering, filtration or consolidation technology. Operators must evaluate appropriate engineering solutions based on facility-specific risks, conditions and performance requirements.


How does water management affect tailings dam safety?

Water influences pore pressure, effective stress, shear strength, seepage and the overall behaviour of deposited tailings. Effective water management is therefore an important component of tailings facility risk management.


What is tailings consolidation?

Tailings consolidation is the process through which pore water is expelled from saturated tailings under sustained loading, resulting in a reduction in void ratio and an increase in effective stress.


What is Accelerated Mechanical Consolidation?

Accelerated Mechanical Consolidation (AMC™) is Phibion's proprietary in-situ tailings consolidation and compaction engineering process using MudMaster® technology. It applies repeated mechanical loading to deposited tailings to accelerate consolidation and facilitate water release.


Can AMC help mining companies meet GISTM requirements?

AMC is not a GISTM compliance or certification solution. However, depending on site conditions and verified outcomes, it can support specific tailings management objectives, including consolidation, water recovery, storage optimisation and progressive closure planning.


Why is progressive closure important for tailings storage facilities?

Progressive closure allows operators to address rehabilitation and closure requirements during active mine operations rather than postponing all activities until deposition ends. This can help improve long-term planning and manage closure liabilities.


Conclusion: Better Tailings Management Requires More Than Compliance


The Global Industry Standard on Tailings Management represents an important step forward for the mining industry. It establishes clear expectations for safer tailings facilities, stronger governance, greater transparency and responsible management throughout the facility lifecycle. But the real opportunity lies in turning those expectations into practical improvements. Mining companies must continue to improve how they understand, deposit, monitor, treat and ultimately rehabilitate tailings.


That means looking beyond containment and conventional dewatering methods to consider technologies that can improve the physical condition of deposited material, recover water, optimise existing storage facilities and support progressive closure. At Phibion, we believe better tailings management starts with improving the tailings themselves. Through our proprietary Accelerated Mechanical Consolidation (AMC™) process and MudMaster® technology, we work directly within existing tailings storage facilities to accelerate consolidation, facilitate water recovery and help mining operators optimise their tailings management strategies.


GISTM establishes the expectations. Engineering, technology and responsible operational decisions turn them into action.


Phibion – Making tailings dams safer, smaller and more sustainable.

Comments


Australia
Phibion Pty Ltd

158 Benjamin Place

Lytton, 4178

Brisbane, Queensland, Australia

Brazil
Phibion Brasil
Av. Raja Gabagli, 1093-
Andar 8 Sala 23 Luxemburgo

Belo Horizonte, Minas Gerias, Brasil
Cep 30.380-403

Jamaica
Phibion Pty Ltd

3 Haughton Avenue

Kingston 10, Jamaica

  • Whatsapp
  • LinkedIn
  • Youtube
USA
Phibion Pty Ltd

7301 North 16th Street  Suite 102, Office 164, Phoenix, AZ  85020

Chile
Phibion Chile SpA

Av. Alonso de Córdova 5151 of 604 - Las Condes

Santiago, Chile

Phibion TSF
bottom of page